Introduction: tractor is an important means of transportation and production in agricultural planting management. In the past, who basically had a small four-wheel tractor must be the man of the moment in the village. Now, with the rapid development of agricultural planting industry, these small household tractors are gradually replaced by large tractors or automobiles with more perfect functions

Tractor is an important means of transportation and production in agricultural planting management.

In the past, basically who had a small four-wheel tractor must be the man of the moment in the village.

Nowadays, with the rapid development of agricultural planting industry, these small household tractors are gradually replaced by large tractors or cars with more perfect functions, but tractors are still their main production tools in many areas. Recently, some netizens reported that tractors always have oil leakage accidents and don't know how to deal with them.

Now let's learn about several common tractor oil leakage accidents and treatment methods for your comparison and summary. Common oil leakage accidents of tractors I: oil plug oil leakage plug oil plug oil leakage part generally includes conical plug, process plug and flat plug. Specific solutions shall be taken according to different situations.

Treatment: if the screw is damaged or the standard is unqualified, it needs to be replaced with new parts; If the conical plug is worn, it can be changed to flat plug and padded before use.

Accident 2: the switches of the tractor mainly include mailbox switch, water valve and diesel switch. In case of switch oil leakage, these switch parts need to be checked one by one. Treatment method: if the fitting surface is not tight, resulting in oil leakage, fine valve sand and engine oil can be used for grinding; If the sealing packing and fastening thread are damaged, they shall be replaced and fastened in time.Causes of common tractor oil leakage accidents

accident 3: joint oil leakage. The causes of joint oil leakage generally include uneven contact surface of the joint or groove marks, burrs, loose bolts and so on. Treatment method: according to the degree of unevenness, use fine sandpaper or oilstone to grind it. If the unevenness is too large, configure additional gaskets and tighten the fixing bolts at the same time.

Accident 4: oil leakage of rotary shaft oil leakage of rotary shaft is mainly caused by mutual wear and looseness between shaft and hole. Treatment method: it is recommended to install the seal ring groove. The main parts to be checked include the shift lever shaft of the starter, the clutch handle shaft and the pressure reducing shaft of the engine. If the rubber ring of the pressure reducing shaft is aging and does not endure laziness, it shall be replaced in time. Treatment methods for common tractor oil leakage accidents the above are some common tractor oil leakage accidents and treatment methods. You can compare them one by one. If you don't understand anything, you can also consult some experienced operators

Pre: Tractor maintenance requirements
Next: Correct use and maintenance of tractor braking system