If you want to prolong the service life of farm machinery, you must deal with the problems of sudden breakdowns during the use of farm machinery in a timely manner. The following together with a simple study to understand the emergency methods of several common failures in the use of agricultural machinery.

If you want to extend the service life of farm machinery, then the sudden failure of farm machinery in the process of use must be dealt with in a timely manner. The following together with a simple study to understand the emergency methods of several common failures in the use of agricultural machinery.

The principle of emergency repair of farm machinery failure

To grasp the safety first, according to local conditions, local materials, simple and easy to use method. Emergency measures taken, must be the first time to reach the repair shop to replace the replacement parts, materials, with formal repair methods to restore the original technical condition.

I. Agricultural machinery and equipment leakage of oil.

1, once found in the use of agricultural machinery and equipment oil tank leakage, should immediately stop the operation (i.e., stop the engine off), check out the leakage point, wipe the leakage clean, with bubble gum and other temporary adhesive timely plugging the leakage, temporarily block the leakage, to be brought back to the farm machinery repair shop, available epoxy resin adhesive repair or direct replacement of the oil tank.

2, oil pipeline rupture should also immediately stop the operation, find the oil pipeline rupture, minor oil pipeline leakage first wipe the pipeline clean, and then use candles or soap to coat the rupture, and then use sealing tape to wrap around the oil pipeline rupture, and bundle tight.

3, oil pipeline leakage can also be used to cut the oil pipeline rupture, the two ends of the intact oil pipeline spliced together, and then wrap the sealant tape, and bundle tight (this method is only used for longer oil pipeline processing).

Second, the farm machinery into the mud pit, skid driving: at this time can not be forced to fuel the door, so as not to damage the chassis of the farm machinery or make the wheels of farm machinery deeper and deeper, should first stop the operation, with tools to shovel the mud pit into a slope, lay straw branches and other objects, and then start the farm machinery, first reverse gear after the forward gear to let the farm machinery out of the mud pit.

Third, the agricultural machinery belt damage: can be connected with wire at both ends of the belt break and fixed, temporary use, immediately drive to the repair shop to replace the belt, or stop the operation to wait for the belt spare parts to arrive after the installation of good use.

Fourth, indeed, because of the damage to spare parts can not drive out of the field of agricultural machinery, the use of towing methods will be towed away from the farm machinery, should use steel pipe hard tow, strictly prohibited the use of leather rope soft tow. Because agricultural machinery is heavy machinery, it is easy to cause tailgating and other secondary hazards. Brake box damage to agricultural machinery should not use towing, to carry the damaged farm machinery to the repair shop with a load towing method. When towing, keep the distance between the two vehicles in front and behind and drive smoothly.

In summary, if you farmers friends in the use of agricultural machinery, the process of these problems, you can refer to these emergency treatment methods.

Pre: Potato full mechanization operation technology
Next: How to plant rice seedlings by rice machinery? Introduction of rice machine transplanting technology