Combine harvester is the most commonly used harvesting machine for farmers to harvest grain, but it often encounters some faults during harvesting, resulting in the damage of the harvester. So today, let's learn about the common faults and solutions of the header of the combine.

Combine harvester

1、 Causes of cutter blockage:

First, the clearance between fixed and moving blades is too large;

Second, the blade and blade protector are damaged;

Third, the stubble is too low and the knife beam is blocked *;

Fourth, cut hard sundries, such as iron wire and wooden stick;

Fifth, the crop stem is too wet.

In view of the above faults, the methods of reducing the clearance between the fixed and moving blades, replacing the blades or repairing the blade protector or replacing the blade protector, improving the stubble height, removing hard sundries and harvesting in time can be adopted to eliminate them. Combine failure

2、 Reasons for poor feeding of harvester:

First, the traveling speed of the harvester is high,

Second, the gear position of reel is not adjusted correctly,

Third, the reel is too far away from the feeding auger.

In view of the above faults, the method of reducing the forward speed of the harvester, correctly adjusting the gear position and moving the reel backward can be adopted.

3、 Excessive reel loss is the loss caused by dropping grains. The main reason for the excessive loss is that the number and intensity of hitting the grain by the reel are increased and strengthened, and the hitting position is incorrect. Specific reasons:

First, the reel speed is too high,

Second, the reel is forward and high.

For the above faults, the methods of reducing the speed and moving the reel backward can be adopted to eliminate the faults. Common faults and solutions of combine harvester the above is the introduction of common faults and solutions of combine harvester. Have you encountered these situations? Is it the reason for Xiaobian's analysis, and how did you solve it? Welcome to share other problems and solutions about combine harvester.

Pre: How to maintain agricultural machinery after harvesting grain? Pay attention to these three main points
Next: Introduction to disassembly and installation skills of agricultural machinery in maintenance process